Vertex Standard VX-3R Скачать руководство пользователя

Страница: 68 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

microprocessor (due to static electricity, etc.). If this happens, resetting of the microprocessor may restore

normal operation. Note that all memories will be erased if you do a complete microprocessor reset, as

described below.

Microprocessor Resetting

To clear all memories and other settings to factory defaults:

1. Turn the radio off.

2. Press and hold in the [BAND], [H/L] and [V/M] keys while turning the radio on.

3. Press the [F/W] key momentarily to reset all settings to their factory defaults (press any other key to

cancel the Reset procedure).

Set Mode Resetting

To reset the Set Mode Item settings to their factory defaults:

1. Turn the radio off.

2. Press and hold in the [BAND] and [V/M] keys while turning the radio on.

3. Press the [F/W] key momentarily to reset the Set (Menu) mode settings to their factory defaults (press

any other key to cancel the Reset procedure).

Cloning

The VX-3R includes a convenient “Clone” feature, which allows the memory and configuration data from

one transceiver to be transferred to another VX-3R. This can be particularly useful when configuring a

number of transceivers for a public service operation. Here is the procedure for Cloning one radio’s data to

another:

1. Turn both radios off.

2. Connect the optional CT-27 Clone Cable between the MIC/SP jacks of the two radios.

3. Press and hold in the [F/W] key while turning the radios on. Do this for both radios (the order of

switch-on does not matter). “CLONE” will appear on the displays of both radios when the Clone mode

is successfully activated in this step.

4. On the Destination radio, press the [V/M] key (“-WAIT-” will appear on the LCD).

5. Press the [BAND] key on the Source radio; “--TX--” will appear on the Source radio, and the data from

this radio will be transferred to the other radio.

6. If there is a problem during the cloning process, “ERROR” will be displayed. Check your cable

connections and battery voltage, and try again.

7. If the data transfer is successful, “CLONE” will reappear on both displays. Turns both radios off and

disconnects the cloning cable. You can then turn the radios back on, and begin normal operation.

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды