Vertex Standard VX-3R Скачать руководство пользователя

Страница: 33 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

5. Press the [BAND] key; now, as you rotate the DIAL knob to select memories, you will observe that you

can only select memory channels in the current memory bank.

6. To change to another Memory Bank, press the [F/W] key, then press the [BAND] key; now rotate the

DIAL knob to select the new Memory Bank.

To exit from Memory Bank operation, just press the [BAND] key. “MEMORY” will appear on the display,

indicating that you are now in the “regular” Memory Recall mode, without utilization of the Memory

Banks. The memories stored in the various Banks will remain in those banks, however; you do not

need to store them again.

Removing Memories from a Memory Bank

1. Recall the memory channel to be removed from a Memory Bank.

2. Press and hold the [F/W] key for one second, then press the [%] key to remove the memory channel

data from the Memory bank.

Changing a Memory Bank’s Name

You may change the default Memory Bank Name which is indicates on the display while selecting the

Memory Bank to your desired.

1. Press and hold in the [TXPO] key for one second to enter the Set mode.

2. Rotate the DIAL knob to select the Set Mode Item labeled 11: BNK.NAM.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item.

4. Rotate the DIAL knob to select the memory bank on which you wish to change a label.

5. Press the [TXPO] key momentarily to enable changing of the name tag.

6. Rotate the DIAL knob to select the first digit of the desired label.

7. Press the [V/M] key to move to the next character.

8. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the desired label. A

total of six characters may be used in the creation of a label.

9. If you make a mistake, press the [BAND] key to back-space the cursor, then re-enter the correct letter,

number, or symbol.

10. When you have completed the changing of the label, press the PTT switch to save the label and exit.

Moving Memory Data to the VFO

Data stored on memory channels can easily be moved to the VFO, if you like.

1. Select the memory channel containing the frequency data to be moved to VFO.

2. Press and hold in the [F/W] key for one second, then press the [V/M] key. The confirmation massage

(V-WRT?) will appear on the display. Press the [F/W] key to cancel the Moving Memory Data

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды