manualshive.com logo in svg

Vertex Standard VX-3R, Руководство по эксплуатации

Поделиться
Скачать
Vertex Standard VX-3R Скачать руководство пользователя страница 32

FCC ID: K6620285X20 

IC ID: 511B-20285X20 

 

 

VX-3R Operating Manual

 

channel to be “Masked” from view. 

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. 

3. 

Press the [%] key. The confirmation massage (M-DEL?) will appear on the display. Press the [F/W] key 

to cancel the Masking Memory procedure, if desired. 

4. 

Press the [%] key once more. The display will revert to memory channel #1. If you rotate the DIAL knob 

to the location you just “Masked,” you will observe that it is now invisible. 

5.  To Unmask the hidden memory, repeat the above procedure: press and hold in the [F/W] key for one 

second, rotate the DIAL knob to select the masked memory’s number, then press the [%] key to restore 

the memory channel’s data. 

R.F. Says: Watch out! You can manually store data over a “Masked” memory, deleting previous data, if 

you’re not careful. Use the “next available memory” technique storage technique to avoid over-writing a 

masked memory. 

 

Memory Bank Operation 

The large number of memories available in the VX-3R could be difficult to utilize without some 

means of organizing them. Fortunately, the VX-3R includes provision for dividing the memories 

into as many as twenty Memory Groups, so you can categorize the memories in a manner 

convenient to you. You may enter and exit the “Memory Group” mode by a single press of the 

[BAND] key, as we shall see below. 

 

Assigning Memories to a Memory Bank 

1.  Recall the memory channel to be assigned to a Memory Bank. 

2.  Press and hold in the [F/W] key for one second, then rotate the DIAL knob to select the Memory Bank 

number you want as the Memory Bank for this channel (“b 1” ~ “b24,” which is found before memory 

channel “1”). 

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. 

3.  Press the [F/W] key momentarily. 

4.  At this point, the memory channel data is copied into the Memory Bank. 

 

Memory Bank Recall 

1.  Press the [V/M] key, if needed, to enter the MR mode. 

2.  Press the [BAND] key to activate the “Memory Bank” mode. The Memory Bank number will appear on 

the display. 

3.  Press the [F/W] key, then press the [BAND] key.   

4.  Rotate the DIAL knob to select the desired Memory Bank (“BANK 1” through “BANK 24”). 

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. 

 

Vertex Standard Co., Ltd. 

32

Содержание VX-3R






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды