Vertex Standard VX-3R Скачать руководство пользователя страница 61

Страница: 61 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

2. Rotate the DIAL knob to select Set Mode Item 42: INTKEY.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item.

4. Rotate the DIAL knob to select the desired function:

INTNET: Activates/Disable

the internet feature.

INT MR:

Recall the Internet Access Number (SRG) or Access Cord (FRG). Determine the selection

of the SRG or FRG via Set Mode Item 41: INT MD.

SET MD: Short-cut path for recall of one of Set Mode Items. See below box for programming.

5. When you have made your selection, press the PTT switch to save the new setting and exit to normal

operation.

6. If you wish to disable the attenuator, just repeat the above procedure, rotating the DIAL knob to select

“OFF” in step “4” above.

R.F. Say: When assign the [%] key besides INTNET function, you may activate/disable the Internet

Connection feature via Set Mode Item 43: INTNET.

Assign the Set Mode Item to the [%] key.

1. Sets the Set Mode Item 42: INTKEY to “SET MD”, descried above.

2. Press and hold in the [TXPO] key for one second to enter the Set mode again.

3. Rotate the DIAL knob to select the Set Mode Item which you wish to assign to the [%] key as a Menu

short-cut.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

4. Press and hold in the [%] key for one second to assign the Set Mode Item to the [%] key. “MY KEY” will

appear on the display, to confirm that the command was executed.

5. Press the PTT switch to save the new setting and exit to normal operation.

Now, momentary press of the [%] key will immediately recall the selected Set Mode Item. You must press

the [%] key again to exit to normal operation.

ATT (Front End Attenuator)

The attenuator will reduce all signals (and noise) by 20 dB, and it may be used to make reception more

pleasant under extremely crowded conditions.

1. Press and hold in the [TXPO] key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 3: ANT.ATT.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item.

4. Rotate the DIAL knob to change the setting from “OFF” to “ON”.

5. When you have made your selection, press the PTT switch to save the new setting and exit to normal

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды