manualshive.com logo in svg

Vertex Standard VX-3R, Руководство по эксплуатации

Поделиться
Скачать
Vertex Standard VX-3R Скачать руководство пользователя страница 48

FCC ID: K6620285X20 

IC ID: 511B-20285X20 

 

 

VX-3R Operating Manual

 

9.  Press the PTT switch to exit from the Set Mode and activates the Message feature. 

10.  When the Message feature is activated, the “M” notation will appear at the 100 MHz digit of the 

frequency. 

11.  Press the PTT switch again (without the voice message) to transmit the selected message on the 

coordination frequency. It takes approximately 6 seconds to transmit the message. 

 

Receiving a Message 

1.  Set the radio to the coordination frequency. 

2.  Press and hold in the [TXPO] key for one second to enter the Set mode. 

3.  Rotate the DIAL knob to select Set Mode Item 79: SQ TYP. 

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. 

4.  Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item. 

5.  Rotate the DIAL knob to select “MESSAGE” (to activate the Message feature). 

6.  Press the PTT switch to exit from the Set Mode and activates the Message feature. 

7.  When you receive a message: a beep sounds, the TX/BUSY indicator blinks white, and [“Message” 

FROM “sending station’s ID”] scrolls on the display. 

8.  Press any key (except [VOL] key) to clear the received message, and wait for a new message. 

R.F. Say: If you enable the CTCSS/DCS/EPCS Bell feature (described previously), you can confirm that a 

message is coming in by a ringing “bell” sound alert. 

 

To disable the Message feature, repeat the above procedure, rotating the DIAL knob to select “OFF” in step 

5 above. 

 

Emergency Feature 

Emergency Channel Operation 

The VX-3R includes an “Emergency” feature which may be useful if you have someone monitoring on the 

same frequency as your transceiver’s UHF “Home” channel. See page ?? for details on setting the Home 

channel. 

 

The “Emergency” feature is activated by pressing and holding in the [HM/RV] key for one second. 

When this is done, (A) the radio is placed on the UHF amateur band Home channel, (B) it emits a loud 

“Alarm” sound (the volume is controlled by the rotating the DIAL knob while press and holding the [VOL] 

key), (C) it flashes the TX/BUSY indicator in white, (D) if you press the PTT switch, you will disable the 

Emergency feature temporarily; you can then transmit on the UHF Home channel, and (E) two seconds 

after the PTT release, the Emergency feature will resume. 

To disable the “Emergency” feature, press and hold the [HM/RV] key for one second or turn the radio Off by 

 

Vertex Standard Co., Ltd. 

48

Содержание VX-3R






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды