Vertex Standard VX-3R Скачать руководство пользователя страница 54

Страница: 54 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

SRG (“Sister Radio Group”) mode

1. Press the [%] key to activate the Internet Connection feature. The “%” icon will appear in the upper

right corner of the display.

2. Rotate the DIAL knob, while pressing and holding in the [%] key, to select the access number (“DTMF

1” - “DTMF 1”, “DTMF A”, “DTMF B”, “DTMF C”, “DTMF D”, “DTMF E(*)”, “DTMF F(#)”) corresponding

to the WIRES

™

repeater to which you wish to establish an Internet link (ask your repeater

owner/operator if you don’t know the access numbers in the network). Now press the PTT switch to

exit from the selection mode.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

With the Internet Connection feature activated (as in step 1 above), the VX-3R will generate a brief (0.1

second) DTMF tone according to your selection in step 2. This DTMF tone is sent at the beginning of

every transmission to establish or maintain the link to the remote WIRES

™

repeater operating in the

SRG mode.

4. To disable the Internet Connection feature, press the [%] key again (The “Internet” icon disappear from

the display.

R.F. Says: If other users report that you always have a DTMF “beep” at the beginning of each transmission,

and you are not operating in conjunction with Internet access, disable this function via step 4 above.

FRG (“Friendly Radio Group”) mode

You may access other Internet Link Systems (including WIRES

™

in the FRG mode) that use a DTMF string

for access.

Programming the FRG code

Load the DTMF tones which you wish to use for Internet-link access into an Internet Memory Resister. For

purposes of this example, we will use “#(F)1101D” as the access code (the “#” key is denoted by the letter

“F”).

1. Press and hold in the [TXPO] key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 41: INT.SEL.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key to enable adjustment of this Set Mode Item.

4. Rotate the DIAL knob to select the DTMF Memory register (“F 0” - “F63”) into which you wish to store

the access code.

5. Press the [V/M] key momentarily. The first digit will blink.

6. Rotate the DIAL knob to select “F” (representing DTMF “#”: the first digit of the DTMF string).

7. Press the [V/M] key momentarily to accept the first digit and move to the second digit of the DTMF

string.

8. If you make a mistake, press the [BAND] key to back-space the cursor, then re-enter the correct letter

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды