Vertex Standard VX-3R Скачать руководство пользователя

Страница: 13 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

of the AM or FM Broadcast station. When the amateur band signal drops, the AM or FM Broadcast

station will be heard from the speaker, and SUB-RX Operation is resumed (the amateur band

frequency is monitored while the AM broadcast station is heard from the speaker) according to the

SUB-RX Operation Resume mode selected in step 3 above.

8. You may monitor the amateur band forcibly while holding the [MONI] key.

To disable the AF Priority function, just repeat the above procedure, rotating the DIAL knob to select “OFF”

in step 3 above.

R.F. Say: 1) You may transmit the VX-3R on the frequency set in step1 above by pressing the PTT switch,

even if the SUB-RX Operation is activated.

2) You may change the frequency of the amateur band by rotating the DIAL knob while pressing the [MONI]

key.

Advanced Operation

Now that you’re mastered the basics of VX-3R operation, let’s learn more about some of the really neat

features.

Keyboard Locking

In order to prevent accidental frequency change or inadvertent transmission, various aspects of the

VX-3R’s keys and switches may be locked out. The possible lockout combinations are:

KEY: The front panel keys are locked out

PTT: The PTT switch is locked (TX not possible)

KY+PTT: Both the keys and PTT switch are locked out

To lock out some or all of the keys:

1. Press and hold in the [TXPO] key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 46: LOCK.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key momentarily to enable adjustment of this Item.

4. Rotate the DIAL knob to choose between one of the locking schemes as outlined above.

5. When you have made your selection, press the PTT switch to save the new setting and return to

normal operation.

To activate the locking feature, press the [F/W] key, then press and hold in the [BAND] key for one second.

The “Key Lock” icon will appear on the LCD. To cancel locking, repeat this process.

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Похожие инструкции для VX-3R

Бренды по названию

Популярные бренды