Vertex Standard VX-3R Скачать руководство пользователя страница 59

Страница: 59 / 85

FCC ID: K6620285X20

IC ID: 511B-20285X20

VX-3R Operating Manual

If one of the “r” modes is selected in step 4 above, press the [F/W] key to stop the CW generation.

12. To stop the CW generation, press the [F/W] key again.

13. To disable the CW learning feature, press the PTT switch.

R.F. Says: 1) The “CPM” selection is based on the international “PARIS” standard, which stipulates five
characters per word.

2) You may adjust the CW sidetone pitch via Set Mode Item 21: CWPTCH. Available selections are 400 -

1000 Hz (50 Hz/step).

CW Training Feature

The VX-3R provides another CW learning function; call it a CW Training feature, which sends random

Morse Code via the sidetone (heard in the speaker), so you can improve your CW proficiency.

1. Press and hold in the [TXPO] key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 22: CWTRNG.

Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.

3. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item.

4. Press the [MODE] key to select the Training mode (displayed in fine print at the upper edge of the

LCD):

A: Sends

five

Alphabet characters only

A_r: Sends Alphabet characters only (Repeatedly)

Sends five Numeric characters only

n_r: Sends Numeric characters only (Repeatedly)

An: Sends five Alphabet, Numeric, “?,” and “/” characters (Mixed)

Anr: Sends Alphabet, Numeric, “?,” and “/” characters (Mixed, Continuously in groups of five)

5. Rotate the DIAL knob to select the Morse speed. You may select the units of the code speed between

“CPM: characters per minute)” and “WPM (Words per minute)” by pressing the [V/M] key.

6. Press the [BAND] key to switch the flashing of the LED (white) on and off; a “dot” by the CW speed

indicates that the LED is on.

7. Press the [F/W] key to begin generation of the code characters (CW sidetone only, the radio does not

transmit); the transmitted characters will appear on the display. If one of the “r” modes is not selected in

step 4 above, press the [F/W] key to send another code group.

If one of the “r” modes is selected in step 4 above, press the [F/W] key to stop the CW generation.

8. Rotate the DIAL knob while press and holding the [VOL] key to adjust the CW sidetone outputs level.

9. Press the PTT switch to disable the CW Training feature and exit to normal operation.

R.F. Says: 1) The “CPM” selection is based on the international “PARIS” standard, which stipulates five
characters per word.

2) You may adjust the CW sidetone pitch via Set Mode Item 21: CWPTCH. Available selections are 400 -

1000 Hz (50 Hz/step).

Vertex Standard Co., Ltd.

Содержание VX-3R






















































































Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды

Vertex Standard VX-3R, Руководство по эксплуатации

Результаты поиска

Содержание VX-3R

Отзывы:

Бренды по названию

Популярные бренды