TRUSS LEG KIT
The Model 24 uses an opening that is 22 ½” x 46 ½” thus if your pre
-
manufactured Trusses are on 24” centers,
the Model 24 will go right in between the two joists. And the truss leg kit available from us swings the legs
around so the lift will sit “on” the
joists vs. outside the joists. If your Versalift legs are in the way of the trusses,
you will need the truss leg kit. The following should be helpful in your requirement to use the kit or not. If you
are in question, order the kit, and if you do not need it, you can return it for full credit.
Shown here is a job that is built of Pre Manufactured Trusses, however the Truss Leg Kit is
not required since the Versalift feet do not butt up against the truss. Call us if you have
questions. (405) 516 2412.
