Vermont Castings 33CFDVNI, Инструкция по установке и эксплуатации

Страница: 36 / 68

CFDV Series Gas Fireplace
36
20306739
ON
OFF
REMOTE
WALL SWITCH
ON
OFF
OPTIONAL REMOTE
CONTROL RECEIVER
PILOT HI
LO
ON
OFF
TH
TP
TH/TP
FP3032
Dv wiring diagram
REMOTE WALL MOUNTED SWITCH
A remote wall switch and up to fifteen (15) feet of 18 Ga.
wire may be used with this appliance. Attach the wall
switch in a junction box at the desired location on the
wall. Figure 70 . Do not extend beyond the wall switch wire
length provided.
NOTE: Extended lengths of wire may cause the fireplace
not to function properly. Longer length of wire is permitted
if the wire is made out of larger gauge (diameter) wire.
Always check with local code.
Figure 70 –
Wiring Diagram for Wall Switch
ELECTRICAL INSTALLATION – MILLIVOLT
OPTIONAL DC REMOTE SYSTEMS
See section entitled Hearth Mount in the Millivolt hand held
remote instructions supplied with the remote.
1. Using a flat head screw driver, bend the remote tabs up
from the bottom of the fireplace. Figure 71
2. Follow the instructions on remote control to snap the
remote cover plate to the remote receiver
3. Connect the wire terminal from the remote receiver.
Figure 70
4. Use the screws that came with the remote control to
mount the remote receiver cover to the bent up remote
tabs.
Figure 71
Figure 71 –
Optional Control Location
FP3019
36CFDV alt controls
Remote Control
Receiver
Optional Blower
Speed Control
Remote
Tab
Do NOT connect wall switch to 110V circuit.
WARNING