Velocity Operation Manual
www.velocitydetection.com
3
Controls and Indicators
Figure #1 below shows the control buttons, LED indicators and switch locations.
Figure #1
a)
LED: Alarm
•
Red LED.
•
Flashes when there is an active alarm event present.
•
On steady once acknowledged.
•
Off when the alarm condition is cleared, and when the panel has been reset.
b)
LED: Supervisory
•
Yellow LED.
•
Flashes when there is a supervisory event present.
•
On steady once acknowledged.
•
Off when the supervisory condition is cleared (some supervisory inputs may require a system reset if they are latched).
c)
LED: Trouble
•
Yellow LED.
•
Flashes when there’s a fault with a monitored circuit or system component, when a circuit is disabled or when the panel
is in an off-normal condition.
•
On steady once acknowledged.
•
Off when the trouble condition has been cleared (some trouble signals may require a system reset if they are latched).
d)
LED: Alarm Silenced
•
Yellow LED.
•
Flashes to indicate that the Notification Alarm Circuits and the Notification Alarm Devices are deactivated, but the panel
is still in alarm.
