Velocity Operation Manual
www.velocitydetection.com
13
Acknowledge
When an Alarm, Supervisory or Trouble event occurs in the system, the display enters the off-normal mode automatically. The events
are displayed in priority order (Alarm, Supervisory, and Trouble), the local audible sounds and the appropriate LED’s will blink. After all
events have been acknowledged, the buzzer will deactivate and the associated LED will stop flashing and remain on continuously. To
acknowledge an event, do the following:
When the panel receives an event that needs to be
acknowledged, it will display the relevant event status
screen.
Events that are unacknowledged will be highlighted
(Yellow for Trouble, Red for Alarm and Blue for
supervisory.).
The event that is next in the queue to be acknowledged
will be blinking.
Press the
(ACK) button to acknowledge the
blinking event.
When an event has been acknowledged, it will no longer
be highlighted and blinking, instead it will change to solid
white. The panel internal buzzer will also be silenced.
If there are multiple events in the queue to be
acknowledged, press
&
to scroll through the
pages. The
(SCROLL DISPLAY) button can also be
pressed to scroll through event pages.
Once all events have been acknowledged, panel status
LED’s (Alarm, Supervisory, Trouble) and the
Acknowledgment LED, will change from flashing to
steady to indicate that there are no pending events to be
acknowledged.
If there are multiple event types waiting to be
acknowledged on the panel, press either the
,
or
icon to navigate to the required event
screen.
