Velocity Operation Manual
www.velocitydetection.com
19
The Add / Remove tab allows devices to be manually
added or removed from the system. This is useful if it is
not possible to perform a loop learn (e.g., if a detector is
to be changed to a different model, and the replacement
is not available, or, if the loop is disconnected to perform
maintenance / repair work).
To manually remove a device, tap the device so that it’s
highlighted yellow, then press the delete icon
.
To manually add a device, press the add icon
.
Select the address and device type of the item being
added.
Enter the point text for the device, and select which
zone it will be in.
SLC Device Options
Each addressable Velocity device has a number of configuration settings that can be programmed at the panel. The configuration
screen is accessed by selecting the device on the options tab. The options for each device are:-
Device
Options
VDOT-H2
(Addressable Heat Detector)
Available options:
Led Flash:
(Off) / (On)
