2
Legal requirements
For your safety
© Continental Automotive Technologies GmbH
17
– If the driver card is stolen, this must
also be reported to the police. Only
then can a new card be requested
at the local authority upon present-
ation of the police notification.
– In case of loss of the driver card, a
declaration on oath must be made
to be able to receive a new card. If
the old card is found again, it must
be handed in.
– In case of damage or malfunction
of the driver card:
Hand the card over to the relevant
authority.
The replacement card must be re-
quested within 7 calender days.
• A journey may be continued without
driver card for a period of
15 calender days or longer if neces-
sary for the return of the vehicle to the
company location.
• If the authority of a foreign member
state replaces the driver card: Imme-
diately notify your relevant authority of
the reason.
• The driver card is valid for 5 years.
Upon expiry of the validity of the
driver card, the driver must carry the
card in the vehicle for at least another
56 calendar days.
• The card will only be withdrawn if it
turns out that it was forged or another
driver uses or has used the card. Or if
the driver card was requested under
false pretences and/or using forged
documents. This means that even in
case of a driving licence withdrawal or
a driving ban, the card may remain
with the driver.
► Departure from legal
requirements
In order to ensure the safety of persons,
the vehicle or the transported goods, de-
viations from the applicable legal provi-
sions may be necessary.
In such cases, the driver must indicate
the type and reason of the deviation with
handwritten entries at the latest on ar-
rival at a suitable stopping place. For ex-
ample:
• On the tachograph chart
• On a printout from the DTCO 4.1
• In the work schedule
► Obligations of the contractor
The calibration and repair of the
DTCO 4.1 may only be carried out by an
authorised specialist workshop.
• After a vehicle delivery and if not
already happened:
Have an authorised specialist work-
shop enter the following data of the
calibration into the DTCO 4.1:
– Member state
– Vehicle registration number
• Log in/out the company at the start/
end of the vehicle use in the
DTCO 4.1.
Registration – inserting company
• Make sure that enough authorised
rolls of paper for the printer are avail-
able in the vehicle.
Содержание DTCO 4.1
