VDO DTCO 4.1, Инструкция по эксплуатации

Страница: 68 / 172

6
Operation by the contractor Menu functions in the company mode
68
Instruction manual DTCO 4.1 - Edition 02/2023 - BA00.1381.41 100 102
• Access to data from an inserted driver
card
• Access to the front interface for au-
thorised download of the mass
memory data
In the EU, the data must be downloaded
every 3 months from the mass memory.
In the following cases, it is also useful to
download the data:
• Sale of the vehicle
• Immobilisation of the vehicle,
• When replacing the DTCO 4.1
■ Menu functions in the
company mode
The navigation within the menu functions
always follows the same system.
è
Navigating within menus [
}
42]
If the company card is inserted into
drawer 2, all main menus which are as-
signed to this card drawer remain locked.
è
Menu access lock [
}
86]
In this case, you can only display, print
out or download data from a driver card
inserted in card drawer 1.
è
First menu level – Standard values
[ } 75]
■ Registration – inserting
company card
IMPORTANT
Operation by contractor equals the op-
erating mode “Company” as per Imple-
mentation Regulation (EU) 2016/799
Annex I C, as amended.
• Insert the company card into a free
card drawer;
è
Inserting card [
}
42] .
By inserting the company card, the
language stored on the card is set on
the display.
IMPORTANT
You can set your preferred language in-
dividually.
è
Setting the language [
}
76]
The menu displayed guides you step by
step to the complete operational readi-
ness of the DTCO 4.1: