CHAPTER 2 - INSTALLATION
13
87-900-045-01
(D)
2.5 EXTRACTING THE PROBE FROM
ITS HOUSING
As shown in fig. 2-7, extract the probe by first pushing
the probe itself at its base and then sliding it out of its
housing.
Figure 2-7
2.6 SET-UP WITH EXTENSION PROBE
Assemble the extension probe as shown in fig. 2-8
(screw the probe to the extension stick before
extending it).
To assemble the probe stick to the guard, remove and
save the cap, slightly unscrew the nut, then carefully
insert the extension probe and lock the guard screw.
Figure 2-8