KAPITEL 4 - WARTUNG UND ERSATZTEILE
99
87-900-045-01
(D)
4.5 EIGENTEST ANZEIGEN
Für die meisten Fehler gibt es eine Fehlerdiagnostik,
die bei Auftreten des Fehlers wie folgt angezeigt wird.
ANMERKUNG
Der Heizer zird z.B. kontinuierlich geprüft. Tritt plötzlich
ein Fehler auf, erscheint in der Anzeige Abbildung 4-5.
H
e i z f a
d
e
n
D E F E K T
Abbildung 4-5
Dieser Hinweis bleibt 1 Min. auf der Anzeige, danach
schaltet sich HeliTest automatisch ab. In diesem Fall
lassen Sie das Gerät einen Eigentest machen. Wird
der Heizer immer noch als defekt gemeldet, rufen Sie
das nächste Büro an.
ANMERKUNG
Tritt während des Eigentestes des Sensors ein Fehler
auf erscheint die Anzeige Abbildung 4-6.
E
m
p f . T
e s t
S T I C K S T O F F S P R . *
Abbildung 4-6
Diese Anzeige erscheint solange bis die
vorgeschlagenen Schritte getan wurden, oder der
HeliTest abgeschaltet worden ist (siehe Anmerkung).
ANMERKUNG
- Sprühen Sie Stickstoff oder Argon auf die
Sondenöffnung und entfernen Sie den HeliTest
aus der mit Helium verseuchten Zone; solange
bis Abbildung 3-16 erscheint (max. 15 Min.).
- Wiederholen Sie den Eigentest gemäss
Paragraph
3.2.
Sollte weiterhin Abbildung 4-6 angezeigt werden, rufen
Sie bitte das nächste Verkaufsbüro an.
ANMERKUNG
Tritt während des Eigentestes der Schnüffelleitung ein
Fehler auf, so erscheint Abbildung 4-7.
S o n d e
D E F E K T
Abbildung 4-7
Diese Anzeige bleibt 1 Min. stehen, danach schaltet
sich HeliTest automatisch ab. Um wieder in den
normalen Meßbetrieb zu kommen gehen Sie wie folgt
vor:
•
prüfen Sie ob der gesinterte Bronzefilter an der
Schnüffelsonde oder an der Teleskopschnüf-
felsonde verstopft ist (siehe Paragraphs 4.3
und 4.4).
•
wiederholen Sie den Eigentest und wenn die
Schnüffelleitung immer noch als defekt angezeigt
wird, rufen Sie das nächste Büro an.
ANMERKUNG
Wenn während der Einschaltphase oder während des
Betriebes die Batteriespannung unter 10,2 V absinkt,
aber noch über 9,5 V liegt, erscheint in der Anzeige für
1 Min. Abbildung 4-8. Danach wird helitest
automatisch abgeschaltet.
B a t t e r i e
L A D E N
Abbildung 4-8
Die Batterie herausnehmen und wieder aufladen.
Wenn sie nach 12 Stunden nicht wieder aufgeladen ist,
ist sie zu wechseln.