KAPITEL 2 -
INSTALLATION
89
87-900-045-01
(D)
2.7 INBETRIEBNAHME MIT ZUBEHÖR
(VERLÄNGERUNG DER MEßSONDE
UND
ERSATZPROBENKÖPFE)
Um die Verlängerung anzuschließen, entfernen Sie die
Standardleitung, indem Sie die Rilsan-Leitung von der
Basis-Einheit abmontieren (siehe Abbildung 2-9).
Abbildung 2-9
Drücken Sie auf den Leitungsanschluß mit der Spitze
eines Schraubendrehers.
Dann ziehen Sie das Rilsan Rohr heraus und geben
den Ring wieder frei. Prüfen Sie die Spitze der
Verlägerung auf Beschädigung und führen Sie das
Rohr in die Basis Einheit, wie es in Abbildung 2-10
dargestellt ist.
Abbildung 2-10
Das Rohr wird automatisch gesichert. Die Wieder-
Installation der Standardmeßsonde geschieht auf die
gleiche Art und Weise.
Die Installation der verschiedenen Sondenköpfe ist
sehr einfach: Der Standard-Kopf wird abgeschraubt
und durch einen anderen Kopf ersetzt.