KAPITEL 3 - BETRIEBANWEISUNG
91
87-900-045-01
(D)
3.2 HELITEST START
Schalten Sie das HeliTest-Gerät ein, indem Sie die
"ON"-Taste drücken. In der Anzeige erscheint
Abbildung 3-4.
- - - - H e l i T e s t - - - -
W i l l k o m
m e n *
Abbildung 3-4
ANMERKUNG
Ist die gewünschte Sprache nicht eingestellt, bitte ver-
fahren Sie gemäß Paragraph 3.1 um auf die von Ihnen
gewünschte Sprache umzuschalten.
3.2.1 Eigentest
Sek. nachdem Sie die "ON"-Taste gedrückt haben,
beginnt HeliTest automatisch mit einem Eigentest. In
der Anzeige erscheint Abbildung 3-5.
E i g
e
n t e s t
*
Abbildung 3-5
ANMERKUNG
Während des Eigentestes und während des Betriebes
erscheint in der rechten unteren Ecke des
Anzeigefeldes ein blinkendes Asterisk-Zeichen.
Der Eigentest läuft automatisch bis zum Ende ab, oder
es erscheint eine Fehlermeldung.
Nach 4 Sek. erscheint in der Anzeige Abbildung 3-6.
H e
i z
f a d e n t e s t
*
Abbildung 3-6
Am Ende des Heizfadentests (ca. 4 Sek.) erscheint in
der Anzeige Fig 3-7, sofern dieser Test erfolgreich
abgeschlossen wurde.
H e
i z
f a d e n t e s t
O K
*
Abbildung 3-7
oder in der Anzeige erscheint Abbildung 3-8, wenn
dieser Test negativ verlaufen ist und der Heizfaden
defekt ist.
H e
i z
f a
d
e
n
D E F E K T
Abbildung 3-8
ANMERKUNG
Wenn diese Anzeige erscheint wird der Eigentest
automatisch abgebrochen. Diese Anzeige erscheint für
die Dauer von 1 Min. Danach wird das Gerät
automatisch abgeschaltet. Wiederholen Sie dann bitte
den Eigentest gemäß Paragraph 3.2.
Wird der Heizfadentest wiederum als "DEFEKT"
angezeigt, rufen Sie bitte das nächste Büro an.
Anschließend wird ein Batterietest durchgeführt und in
der Anzeige erscheint Abbildung 3-9.
B a t t e r i e t e s t
*
Abbildung 3-9
Am Ende dieses Testes erscheint in der Anzeige
Abbildung 3-10 wenn die Batteriespannung größer ist
als 11,2 Vdc.
B a t t e r i e t e s t
O K
*
Abbildung 3-10