CHAPTER 2 - INSTALLATION
12
87-900-045-01
(D)
2.3 KNAPSACK
It is possible to use HeliTest also with its knapsack,
which protects it from dust and impacts.
To insert the instrument, proceed as follows:
•
Open the knapsack
•
Insert the instrument with full set of batteries
•
Connect the belts to the latches
“A”
•
Wear it as shown in figure 2-2.
To use the instrument, you must open the knapsack
lifting the pull-opening flange, and draw out the probe
from opening
“B”.
Figure 2-5
2.4 SET UP FOR HELITEST WITH BATTERY
CHARGER
Connect HeliTest to the battery charger (see fig. 2-6)
using the battery charger output cable (1) and connect
the power cable (2) to the appropriate power outlet.
Figure 2-6