CAPITOLO 3 – ISTRUZIONI OPERATIVE
42
87-900-045-01
(D)
Se la tensione della batteria è compresa tra 11,2 Vdc e
10,2 Vdc, il display visualizza (fig. 3-11):
B
a t t e r i a
D A R I C A R I C A R E
B
Figura 3-11
Quando è visualizzato questo messaggio, la bat- teria
deve essere ricaricata (rif. paragrafo 4.6).
Dopo circa 4 secondi inizia il controllo del sensore ed il
display visualizza (fig. 3-12):
T e s t s e n s
i b i l i t à
*
Figura 3-12
Questo test verifica la sensibilità dell'HeliTest. Per
essere eseguito con successo è necessaria la
presenza di una certa quantità di elio nella linea di
campionamento.
Entro 1 minuto il test sulla sensibilità termina ed il
display visualizza (fig. 3-13):
T e s t s e n s
i b i l i t à
O K
*
Figura 3-13
Se il test non è stato soddisfacente il display visualizza
(fig. 3-14):
T e s t s e n s
i b i l i t à
D I F
E
T
T O
S
O *
Figura 3-14
Questo messaggio viene visualizzato per un minuto,
quindi HeliTest si disattiva automaticamente. In questo
caso, ripetere la procedura di avviamento. Se dovesse
ricomparire lo stesso messaggio, contattare l’ufficio
vendite.
Se il risultato del test sulla sensibilità è OK, ha inizio il
test del sensore ed il display visualizza (fig. 3-15):
T e s t s e n s o r e
*
Figura 3-15
Dopo 1 minuto la prova è terminata e sul display viene
visualizzato (fig. 3-16) se il sensore risulta OK; in caso
contrario il display visualizza (fig. 3-17):
T e s t s e n s o r e
O K
*
Figura 3-16
T e s t s e n s o r e
S P R U Z Z A R E
A Z O T O *
Figura 3-17
Questo messaggio rimane visibile finché non vengono
intraprese le azioni suggerite (vedere Nota) o finché
l'HeliTest non viene spento.
NOTA
- Allontanare l'HeliTest da sorgenti di elio.
- Se disponibile spruzzare azoto (N2) o argon (Ar)
sulla sonda fino a quando non venga visualizzata
la figura 3-16 sul display (entro 15 minuti
massimo).
- Ripetere la procedura di autodiagnosi seguendo il
paragrafo
3.2.
Se il test sul sensore riporta ancora "SPRUZZARE
AZOTO" contattare l'ufficio vendite.