CAPITOLO 1 - DESCRIZIONE
30
87-900-045-01
(D)
Il pannello frontale dell'HeliTest (fig. 1-4) prevede i seguenti componenti:
Figura 1-4 - Pannello frontale dell’HeliTest
1.
ON - tasto per accendere l'unità.
2.
OFF - tasto per spegnere l'unità.
3. Visualizzatore alfanumerico a cristalli liquidi retro
illuminato, con matrice di punti, 2 linee, 16 caratteri.
4.
MODE - tasto utilizzato per selezionare il funzionamento
con set point regolabile.
5.
SENS - tasto utilizzato per modificare la sensibilità dello
strumento (da alta a bassa e viceversa).
6. AUDIO - tasto per abilitare e disabilitare il segnale
acustico.
7. PROBE - tasto per abilitare e disabilitare la linea di
campionamento quando la sonda è fuori dal suo
alloggiamento.
8. ZERO - tasto per passare da zero automatico a zero
fisso e viceversa.
9.
CLEAN UP - questa funzione viene attivata premendo
contemporaneamente i tasti ZERO e PROBE per un
tempo minimo di 2 secondi, ed è usata per un veloce
recupero dello zero dopo una condizione di saturazione
di elio.
10. BATTERY - questa funzione viene attivata premendo
insieme i tasti PROBE e AUDIO per un tempo minimo di
2 secondi, ed è usata per controllare la tensione della
batteria.
11. LIGHT - questa funzione viene attivata premendo
insieme i tasti AUDIO e SENS per un tempo minimo di 2
secondi, ed è usata per retroilluminare il display
alfanumerico.
12. CAL - questa funzione viene attivata premendo
contemporaneamente i tasti SENS e MODE per un
tempo minimo di 2 secondi, ed è usata per iniziare la
procedura di calibrazione.
13. Presa per cuffia.