CAPITOLO 2 - INSTALLAZIONE
36
87-900-045-01
(D)
2.1 DESCRIZIONE GENERALE
L'imballaggio dell'HeliTest è stato realizzato per
minimizzare la possibilità di danni durante la
spedizione. Al ricevimento si consiglia di ispe- zionare
l'HeliTest ed i relativi accessori. Eventuali danni devono
essere comunicati al trasportatore e all'Ufficio vendite
Varian.
2.2 MONTAGGIO DELL'HELITEST CON
LA BATTERIA
L'HeliTest può essere collegato alla batteria mediante i
connettori di alimentazione a molla oppure tramite
cavo. Questa caratteristica permette di soddisfare
anche esigenze di portabilità molto particolari.
Se si desidera utilizzare l'HeliTest in configurazione
compatta, fissare la batteria sull'unità base, avendo
cura di allineare i reciproci contatti elettrici
(vedi fig. 2-1). Il collegamento è avvenuto
correttamente solo quando si percepisce il "click"
originato dall'incastro degli attacchi laterali.
Figura 2-1
ATTENZIONE
Assicurarsi che l'HeliTest sia correttamente fissato alla
batteria per evitare improvvisi distacchi tra le parti.
Applicare le cinghie tramite gli appositi attacchi e
regolarle in lunghezza a seconda delle esigenze (vedi
fig. 2-2).
Figura 2-2
Quando è necessario utilizzare l'HeliTest in
configurazione separata, collegare la batteria (3)
all'unità base (1) utilizzando l'apposito cavo (2) (vedi
fig. 2-3). Applicare e regolare le cinghie (vedi fig. 2-4).
Figura 2-3
Figura 2-4