CHAPITRE 3 - UTILISATION
71
87-900-045-01
(D)
3.3.8 Vérification de la charge de la batterie
Si durant l'utilisation de l'appareil la charge de la
batterie doit être vérifiée, appuyer alors simultanément
sur les touches "PROBE" et "AUDIO". L'affichage
indiquera la tension de la batterie comme par exemple
figure 3-37.
❙❙❙❙
. . . . . . . . .
❙❙❙❙
0
V = 1 2 . 5
*
Figure 3-37
Cette indication disparaîtra après 5 secondes à moins
que cette fonction ne soit réactivée.
Ce test donne aussi une indication de charge faible de
la batterie (la lettre "B" en bas à droite de l'affichage) et
ce pour une tension de l'ordre de 11,2 Volts. Si la
tension de la batterie est comprise entre 9,5 et 10,2
volts, l'affichage indique (figure 3-38) pendant 1 minute
et l'HeliTest est alors automatiquement arrêté.
B
a t t e r i e
N O F O N C T I O N N E L L E
Figure 3-38
Lorsque cette information apparaît, il faut déconnecter
la batterie de l'appareil pour la remplacer et/ou la
recharger.
3.4 FONCTIONNEMENT
AVEC
L’ALIMENTATEUR
Lorsque l'HeliTest est alimenté par l’alimentateur P/N
969-3535, la lecture du “contrôle de tension” doit être
comprise entre 12 et 13.8 V et le voyant LED du
chargeur doit être rouge (fig. 3-37).
Le voyant LED de l’alimentateur devient vert lorsque
l'HeliTest est arrêté.
3.5 ARRÊT
Pour arrêter complètement l'HeliTest quelque soit son
mode de fonctionnement, ou pendant l'auto-contrôle,
appuyer sur la touche OFF.
NOTE
Durant les changements de fonctionnements, l'HeliTest
ne peut être arrêté.