Vanguard OHV V-Twin, Руководство пользователя

Страница: 83 / 191

4
82
Fig. 24
†
4. Remove fixed main jet (7) using Screwdriver
#19062, Fig. 25 .
5. Reach into carburetor throat with flat blade
screwdriver and push down on end of emulsion
tube (8).
Fig. 25
‡
‡
ˆ
NOTE: Consult the IPL to get the high altitude jet
part number if required.
6. Remove idle jet plug (10) and idle jet (9), Fig. 26 .
Fig. 26
‰
Š
7. Use a pliers to remove the idle mixture screw
adjustment limiter cap (11) if equipped, Fig. 27 .
8. Remove the idle mixture screw (12).
Fig. 27
11
12
9. The top and bottom edges of the throttle plate
are beveled. Mark throttle plate (13) before
removing to ensure reinstallation in the original
position,
Fig. 28 .
Fig. 28
X
13
10. Use a punch as shown and remove throttle shaft
welch plug (14), Fig. 29 .
Fig. 29
ÔÔÔ
ÔÔÔ
ÔÔÔ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÔÔÔ
ÔÔÔ
ÔÔÔ
14
11. Remove snap ring (16) and washer (15), Fig. 30 .
12. Remove throttle shaft, collar (17) and seal (18).