13
LOCKED FOR PRINTING – SELECT SECT. NEEDED >
187
Starter Motor Support Block
A starter motor support block can be made from
stock 1” (25.4 mm) thick as shown in
Fig.
1
. The
dimensions for the block are:
1. 1” (25.4 mm)
2. 0.4” (10.2 mm)
3. 2” (51 mm)
4. 1” (25 mm)
5. 5” (127 mm)
Fig.
1
Starter Motor Test Bracket
A starter motor test bracket may be made from metal
stock 1/4” (6.4 mm) thick steel as shown in
Fig. 2
.
The dimensions for the test bracket are:
a. 4” (101.6 mm)
b. 2-1/4” (57.2 mm)
c. 3-1/2” (88.9 mm)
d. 2” (50.8 mm)
e. 10” (254 mm)
f.
1” (25.4 mm)
g. 3-1/2” (88.9 mm)
1. Drill two holes (1) 3/8” (9.5 mm) diameter for
mounting starter.
2. Use a #7 drill to drill two holes (2) to mount
Tachometer
#19200
. Tap holes for 1/4-20
screws.
3. Drill an extra hole (3) for mounting starter
brackets.
•
CAUTION:
DO NOT clamp motor housing in a
vise or strike with a hammer. Starter motors
contain ceramic magnets that could be broken
or cracked if the housing is damaged.
A growler or armature tester is available from an
automotive parts supplier.
Fig. 2
C
A
D
F
B
E
G
Содержание OHV V-Twin
