Vanguard OHV V-Twin, Руководство пользователя

Страница: 136 / 191

7
135
Fig. 40
Assemble Pinion Gear
1. Lubricate helix with a light coat of grease.
Assemble pinion gear and clutch.
2. Assemble new retainer to shaft.
3. Install new C-ring.
4. Pry up on retainer until C-ring snaps into groove
in retainer, Fig. 39 .
5. Assemble spacer to armature shaft, Fig. 41 .
NOTE: Lip (1) on spacer must face bearing in drive
end cap.
Fig. 41

Assemble Starter
1. Assemble drive lever (2) to pinion (1). Install
armature and drive lever into drive housing (3),
Fig. 42 .
Fig. 42
ƒ
‚

2. Assemble starter housing to drive housing,
engaging notch in housing with tab on drive lever
support,
Fig. 43 .
Fig. 43
„
3. Install brush holder, inserting tabs on brush
holder (6) into starter housing slots (7), Fig. 44 .