Vanguard OHV V-Twin, Руководство пользователя

Страница: 11 / 191

1
10
CAUTION: DO NOT use petroleum solvents to
clean paper cartridge.
DO NOT oil paper cartridge.
DO NOT use pressurized air to clean or dry paper
cartridge.
6. Reinstall pre-cleaner over cartridge.
7. Install cartridge to air cleaner.
8. Install plate, knob and air cleaner cover.
Square Air Cleaner
1. Remove knob(s) (2) and cover assembly (1),
Fig. 3 .
Fig. 3
„

ƒ
‚
2. Remove cartridge (4) and pre-cleaner (5) from
cover.
3. Wash pre-cleaner in liquid detergent and water.
4. Squeeze dry in a clean cloth. Set aside.
5. Inspect cartridge. Replace if damaged or dirty.
CAUTION: DO NOT use petroleum solvents to
clean paper cartridge.
DO NOT oil paper cartridge.
DO NOT use pressurized air to clean or dry paper
cartridge.
6. Install pre-cleaner in cover with foam toward
cover. (Nylon screen toward paper element.)
7. Install paper cartridge in cover with tabs on
cartridge (3) in slots of cover, Fig. 3 .
8. Reinstall cover assembly on air cleaner body.
Cyclonic Air Cleaner
NOTE: The debris valve automatically discharges
dust and debris. There should be minimal
debris for removal.
1. Remove debris from the air cleaner by
squeezing the ends of the debris valve (5),
Fig. 4 .
Fig. 4
„

ƒ
‚
2. Remove the cover (4) from the air cleaner
housing (1).
3. Remove the primary filter (3) and inspect.
Replace the filter if damaged, or dirty.
CAUTION: DO NOT clean or oil these filters.
DO NOT use pressurized air to clean or dry filters.
REPLACE filters if damaged or dirty
4. Inspect the safety filter (2).
NOTE: DO NOT remove the safety filter (2) as part
of the inspection.
If it is necessary to remove the safety filter,
Fig. 5, be sure all debris is removed from the
air cleaner housing before removal.
Replace the safety filter with every third
replacement of the primary filter, or if
damaged or dirty.
5. Reinstall filter(s).
6. Reinstall air cleaner cover.