Valtra T series Versu, Руководство оператора

Страница: 70 / 450

• To deactivate the control stop, press down the side of the control stop switch
opposite to the symbol.
3.2.15 Using the ignition switch
The ignition switch has four positions: OFF position, radio and cold box on
position, power and instrumentation on position, and start position. After turning
the ignition key to OFF position, there is a delay before the main power switches
off.
0
I
II
III
4 5 6 1 2 3
GUID-3396B664-6140-46DE-9A14-D68094FD1B08
1. Ignition switch
2. Ignition key
3. OFF position
4. Radio and cold box (optional) on position
5. Power and instrumentation on position
6. Start position
• To turn on the power, turn the ignition key from the OFF position to the power
on position.
In cold conditions, when the engine is cold, the glow indicator light on the
instrument panel is lit.
• To start the engine, turn the ignition key from the power on position to the
start position after the glow indicator light on the instrument panel has gone
out.
• To turn off the power, turn the ignition key to the OFF position.
OFF position
•
The tractor and several movements of the implements can be stopped if
a fault occurs by turning the ignition key to the OFF position. This will
make the engine stop and the transmission disengage, and the
movement of the linkage stops.
NOTE: Do not turn off the power when the tractor is moving. First, stop the
tractor, apply the parking brake, check that the parking brake symbol (P) is lit
on the instrument panel, and then turn off the power.
IMPORTANT: Do not keep extra keys on the same bunch with the ignition
key. It is possible that your knee touches them and turns the power off.
3. Operation
- 69 -