manualshive.com logo in svg

Valtra T series Versu, Руководство оператора, Страница: 335 / 450

Поделиться
Скачать
Valtra T series Versu Скачать руководство пользователя страница 335

2. Check the battery terminals and cables.

1

GUID-EDD16017-2113-45E3-84FB-2671D4A1D381

1. Battery terminals

3. Clean the battery terminals.

Also clean the surroundings of the battery.

4. Grease the battery terminals.

NOTE: Use Universal Grease for greasing.

5. Close the battery casing.

4.7.4.2 

Changing the engine oil and the oil filter

Change the engine oil filter periodically.
Always use original AGCO Parts engine oil filters.

NOTE: In extremely dusty conditions or when using first generation Biodiesel fuel

with dilution over 7%, change the oil and filters every 250 hours. With second

generation Biodiesel fuel the service interval is normal (600 hours).

NOTE: If the amount of operating hours is low, the oil and filters must be changed

at least once a year.

4. Maintenance

- 334 -

Содержание T series Versu



































































































































































































































































































































































































































































Отзывы:

Нет отзывов