Valtra T series Versu Скачать руководство пользователя страница 102

Страница: 102 / 450

3. Select the speed range and gear.

Select a speed range which:
•

gives the optimum fuel consumption without overloading the engine and

the transmission.

•

allows the engine to operate comfortably at about 75% of its maximum

power.

You can select any speed range and gear you want, but if a gear within the

range of C4 and D5 is selected, automatics shift the gear to C3.
IMPORTANT: Use the creeper gear for slow driving speeds only. Do not use

it for bigger drafting force.

4. Move the power shuttle lever to either drive forward or reverse.
5. If you have started on a slope and kept the brake pedals pressed, release the

brake pedals.
The hillhold is activated and keeps the tractor stationary.

6. Adjust the driving speed with the drive pedal.

This deactivates the hillhold and you can start driving even uphill so that the

tractor does not move downhill at all. Keep an eye on the indicator lights and

gauges while driving.

WARNING: Do not turn the ignition key to the OFF position when

driving. When the power is off, the parking brake applies and all

wheels lock.

NOTE: If the engine stops when driving, for example due to overload, you can

restart it without turning the ignition key to the OFF position first. However, if the

front linkage, PTO, U-pilot, hydraulics or cruise control were in use when the

engine stopped, they have to be restarted separately.

3.8.11

Transmission system

The tractor transmission system has six speed ranges and five Powershift

stages. These together give the tractor 30 forward and 30 reverse gears.
The speed ranges are named LA, LB, A, B, C and D. The speed ranges LA and

LB are called creeper speed ranges. The actual driving speeds achieved depend

on the engine speed and the tyres. The following table includes approximate

driving speeds for each speed range with the engine speed of 1400–2200 rpm

and 20.8-42 tyres.

Speed range

Driving speed (40 km/h models)

Driving speed (50 km/h models)

0.4-1.4 km/h

0.5-1.7 km/h

0.8-2.8 km/h

1.0-3.5 km/h

1.9-6.9 km/h

2.4-8.6 km/h

4.1-14.6 km/h

5.1-18.3 km/h

6.0-21.4 km/h

7.5-26.8 km/h

12.7-40 km/h

16-50 km/h

3. Operation

- 101 -

Содержание T series Versu



































































































































































































































































































































































































































































Результаты поиска

Содержание T series Versu

Отзывы:

Похожие инструкции для T series Versu

Бренды по названию

Популярные бренды

Valtra T series Versu, Руководство оператора

Результаты поиска

Содержание T series Versu

Отзывы:

Похожие инструкции для T series Versu

Бренды по названию

Популярные бренды