Valtra T series Versu, Руководство оператора

Страница: 259 / 450

• Press shortly the U-Pilot activation/recording button of the memory slot you
are going to use.
NOTE: The U-Pilot checks the switch positions of the auxiliary hydraulics and
linkages if used in the programme. If the switch position is not correct, the
function symbol flashes on the display.
Flashing symbol Solution
ON/OFF
GUID-8AB1FCB7-244C-478E-B239-045AC986B8E6
Activate the hydraulics.
GUID-16B49672-D64F-4783-ABA0-38B70F1ED524
Press the change-over button for front linkage/
front loader.
GUID-62A8F953-432C-4C0F-9F0D-1A91EC9DE126
Press the lift/stop/lower switch to stop or lower
position.
GUID-BDA9214B-32E8-4AC1-90B7-7975DC39ED6C
Activate the auxiliary hydraulic valve.
When everything is in order the symbols disappear and the programme
starts. Symbol is in the upper left corner of the display when the
programme is running.
• To pause, press the U-Pilot activation/recording button any time during the
programme.
• To end a pause, press the U-Pilot activation/recording button again.
• To end the programme immediately, press the U-Pilot on/off button.
The functioning of the hydraulics, PTOs and linkages are stopped. The text
STOP is displayed. After few seconds the previously active drive view
appears on the display.
The programme cannot be resumed after stopping it. You have to reactivate
the U-Pilot by turning it off and then back on by pressing the U-Pilot on/off
button. Then you can start the programme from the beginning.
IMPORTANT: When manually performing any operation that is included in
the programme and that has a significant risk (linkages, power take-off
(PTO), hydraulics), the ongoing programme stops immediately.
Interruption of the programme causes the following, if the operation is
included in the programme:
•
The hydraulic operations controlled by the programme are cancelled.
• The movement of the linkages is stopped.
• The PTOs are disengaged.
• The current socket is disconnected.
• The differential lock is disengaged.
• The cruise control is disengaged.
• The state of the four-wheel drive (4WD) does not change.
• The state of the Powershift does not change.
3. Operation
- 258 -