Valtra T series Versu Скачать руководство пользователя страница 352

Страница: 352 / 450

7. Fill up the housing with oil to the level of the hole.

The breather can be loosened for bleeding. Check that the breather is not

blocked. When filling, the tractor has to stand on even ground.

8. Use the front PTO a moment and check oil.
9. Fit the protector.

Fasten the two fastening screws.

4.7.4.18 Checking front PTO couplings

Check the front power take-off (PTO) couplings periodically.
•

Check that all fixing screws are tight.

•

Check that the hydraulic connections have no leaks.

•

Grease the grease nipple on the universal joint.

•

Remove the air blocker from the front linkage frame.

GUID-CDC92894-B278-4A1D-8FED-B6F5A441B428

Air blocker

•

Grease the grease nipple on the universal joint.

GUID-582E1BE5-3747-4390-8EA4-74439B2F1077

Grease nipple

4. Maintenance

- 351 -

Содержание T series Versu



































































































































































































































































































































































































































































Результаты поиска

Содержание T series Versu

Отзывы:

Valtra T series Versu, Руководство оператора, Страница: 352 / 450

Результаты поиска

Содержание T series Versu

Отзывы: