Valtra T series Versu, Руководство оператора, Страница: 176 / 450

1. Press ESC.
2. Navigate to the menu 1 with the up and down arrow buttons.
3. Press the right arrow button.
The auxiliary hydraulics settings are displayed.
3.12.13 Hydraulics view symbols
% %
M2
50 50
100
100
100
100 100
100
100
100
1
2
3
4
1F
1 2 4 6
3
5 3
+
4
GUID-102A9214-BCA3-4760-9706-BDA3FFE90B6F
1. The number of the valve
2. Valve state
3. Duration of the functions per port
4. The set flow rate per port, as a percentage of the maximum flow
5. + port
6. – port
The number of the valve
• Front valves are indicated by "F" after the number.
• A small arrow in the upper or the lower corner indicates that there are six or
more valves. You can then scroll up or down to view the ones that do not fit
on the screen with the up or down arrow button.
• Memory position M1, M2 or M3 is selected with the selection switch, and the
position of the selection switch can be seen in the upper corner.
Valve state
•
= active, the valve settings are shown
•
= not active
The set flow rate per port, as a percentage of the maximum flow
• The corresponding flow rate is displayed beside the percentage as a bar.
• The valve can be used for single action when the implement is engaged to
only one of the quick couplings.
Duration of the functions per port
• 0–60 s timed duration of the position lock
• = the position lock continuously on
• = floating position (only in the – port)
• empty = no function active
3. Operation
- 175 -