manualshive.com logo in svg

Valtra T series Versu, Руководство оператора, Страница: 246 / 450

Поделиться
Скачать
Valtra T series Versu Скачать руководство пользователя страница 246

For heavy proportional use it is recommended to use the 1¾” (45 mm) shaft.
You can engage the ground speed PTO by turning the speed control knob to the

GSPTO position and activate it by pressing the switch for rear PTO.
IMPORTANT: If the ground speed power take-off is activated and the PTO speed

exceeds 1800 rpm, the buzzer alarms and message “SLOW DOWN, PTO

SPEED TOO HIGH!” is shown on the instrument panel display. If this occurs,

immediately decrease the rpm to prevent damage to the rotating parts of the

PTO.

The activation and deactivation of the ground speed PTO is indicated in the

proline instrument panel.
When the proportional ground speed PTO is activated, the maximum speed is

limited to 15 km/h. The actual driving speed may momentarily exceed the limit,

but then the engine speed is automatically set to idle until the driving speed is 15

km/h or less.

1

GUID-0D31E500-E360-4863-B5FE-DB5B63CF763F

1. Speed control knob for rear PTO

3. Operation

- 245 -

Содержание T series Versu



































































































































































































































































































































































































































































Отзывы:

Нет отзывов