manualshive.com logo in svg

Valtra T series Versu, Руководство оператора, Страница: 328 / 450

Поделиться
Скачать
Valtra T series Versu Скачать руководство пользователя страница 328

1

1

GUID-ECEDB78F-33CF-4E8B-8303-7A8EBF8E467B

1. Greasing nipple

1. Lift the front end of the tractor a little.

Do not lift from front axle or front weight bracket.

2. Grease the nipples on both bearings.

Tilt the axle to make sure that grease goes equally into the bearings.

4.7.3.9 

Greasing air-suspended front axle mounting bearings

Grease the air-suspended front axle mounting bearings periodically.
NOTE: Use Universal Grease for greasing.

1. Frequently check that all screws and nuts are tight.

4. Maintenance

- 327 -

Содержание T series Versu



































































































































































































































































































































































































































































Отзывы:

Нет отзывов