Valtra T series Versu, Руководство оператора, Страница: 414 / 450

1 2
3
GUID-66125F0D-15AC-4B75-941A-E505A25F172E
1. Return oil filter of the auxiliary hydraulic system
2. Lubrication filter of the transmission system
3. Low pressure filter of the transmission system
Oil filters are located on the right side of the tractor under the cab. The oil filters
are labelled with following text on the mounting piece on top of it:
•
HYD for return oil filter
• LUB for transmission lubrication oil filter
• TRANS for low pressure filter.
1. Release the pressure sensor wires of the return oil filter of the auxiliary
hydraulics.
2. Attach an implement to the tractor and connect quick couplings.
3. Run the engine.
4. Operate the implement connected to the auxiliary hydraulics.
5. Check if the pressure oil filter clogging indicator light is lit.
If the indicator light is not lit, the fault is in the return oil filter.
6. Change the return oil filter if the blocking is caused by this filter.
7. If the indicator light is still lit change the lubrication filter and the low pressure
filter of the transmission system.
IMPORTANT:
If the blocking is in one of the transmission filters and it occurs considerably
ahead of scheduled replacement of the filters, it may be an indication of
partial damage to the transmission system. In this case, further investigations
need to be made to avoid additional damage to the transmission system.
5. Troubleshooting
- 413 -