Valtra T series Versu Скачать руководство пользователя страница 116

Страница: 116 / 450

1. Open the fuel tank cap.

GUID-495443FB-A0E5-4C63-827A-BD3CC2A4C459

1. Fuel tank cap

2. Fill the tank.
3. Close the fuel tank cap.

IMPORTANT: Never put AdBlue/DEF in the fuel tank, as the engine and fuel

system may become damaged.

IMPORTANT: Never put fuel in the AdBlue/DEF tank. Even small amounts of fuel

in the AdBlue/DEF tank may damage the gaskets of the selective catalytic

reduction (SCR) system.

IMPORTANT: Do not start the engine if the tank has been filled with a wrong type

of additive. If filled with a wrong additive, the tank must be carefully emptied and

washed before starting the engine.

3.8.14.2 Filling the AdBlue/DEF tank

WARNING: Always turn off the power before filling up.

WARNING: Do not smoke while refuelling the tractor.

WARNING: Keep away from open fire.

3. Operation

- 115 -

Содержание T series Versu



































































































































































































































































































































































































































































Результаты поиска

Содержание T series Versu

Отзывы:

Valtra T series Versu, Руководство оператора, Страница: 116 / 450

Результаты поиска

Содержание T series Versu

Отзывы: