Ulvac CR16B, Инструкция по эксплуатации

Страница: 49 / 84

iv
YK16-0010-DI-002-02
Installation and storage
Transfer
Countermeasure to the earthquake
There is a risk that the Pump lays down or slides and breaks peripheral units if
it was not correctly fixed. Be sure to give allowances to the vacuum piping,
and electric cables so that they absorber vibrations to prevent them from
breaking and/or dismantling.
WARNING
(1) Do not push the Pump over sideways because it is shipped with
lubrication oil filled up.
(2) Give the instruction them further to use the unloading machinery such as
crane to take out the product of the cardboard, lift it up with its top eyebolt
and transfer it on lifting. Check the eyebolt whether it has no error before
use.
(3) Only the technically entitled person should be in charge of conducting the
unloading operation and operating the unloading machinery.
(4) There is a risk that the Pump might drop or lay down when attempted
unreasonable operation or machinery setup was not sufficient. You are
strictly restricted to enter beneath the Pump.
WARNING
(1) Although this pump is provided with casters, do not move it a long
distance using these casters.
(2) Weight of this product is as follows.
CR 60 : 48 kg
You have a risk of giving damage to your back as the load larger than
safety standard shall be required to transfer the product. Be sure to use
the loading machinery (such as mobile crane) to lift up the Pump or load it
on the pallet and fix it with Jack and run the Pallet truck for its transfer.
WARNING