UFactory 850, Руководство пользователя

Страница: 63 / 228

63
robotic arm mounting surface or other equipment;
2. Power off the robotic arm by pressing the emergency stop button on
the control box;
3. Fix the gripper on the end of the robotic arm with 2 M6 bolts;
4. Connect the robotic arm and the gripper with the gripper connection
cable;
Note:
1. When wiring the gripper connection cable, be sure to power off the
robotic arm, to set the emergency stop button in the pressed state,
and to ensure that power indicator of the robotic arm is off, as to
avoid robotic arm failure caused by hot-plugging;
2. Due to limited length of the gripper connection cable, the gripper
connector and the tool/end effector connector must be on the same
side;