UFactory 850, Руководство пользователя

Страница: 45 / 228

45
specifications are as follows:
Parameter Min Typical Max Unit
Input Voltage -0.5 - 30 V
Logic Low Voltage - - 1.0 V
Logic High Voltage 1.6 - - V
Input Resistance - 47k - Ω
2.3.2.1. Tool Digital Input Usage
The following figure shows the connection with the simple switch.
2.3.3. Tool Analog Input
The tool analog input is a non-differential input. The electrical
specifications are as follows:
Parameter Min Typical Max Unit
Input Voltage in Voltage Mode -0.5 - 3.3 V
Resolution - 12 - Bit
Input Current in Current Mode - - - mA
Pull-down Resistors in the 4mA to 20mA Current - - 165 Ω
Resolution - 12 - Bit
1. In the current/voltage mode, the analog input does
not provide over-voltage protection. Exceeding the
limits in the electrical code may result in permanent
damage to the input port.
2. In current mode, the pull-down resistance depends