TOBY-L4 series - System Integration Manual
UBX-16024839 - R04
Approvals
Page 130 of 143
4.4
European Conformance CE mark
TOBY-L4906 modules have been evaluated against the essential requirements of the Radio Equipment Directive
2014/53/EU.
In order to satisfy the essential requirements of the 2014/53/EU RED, the modules are compliant with the
following standards:
Radio Spectrum Efficiency (Article 3.2):
o
EN 301 511
o
EN 301 908-1
o
EN 301 908-2
o
EN 301 908-13
Electromagnetic Compatibility (Article 3.1b):
o
EN 301 489-1
o
EN 301 489-52
Health and Safety (Article 3.1a)
o
EN 60950-1
o
IEC 62368-1 and EN 62368-1
Radiofrequency radiation exposure information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter except as authorized
in the certification of the product.
The gain of the system antenna(s) used for the TOBY-L4906 modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the
following values for mobile and fixed or mobile operating configurations:
o
2.9 dBi in the 900 MHz band, i.e. GSM 900 or UMTS FDD-8 band
o
8.8 dBi in the 1800 MHz band, i.e. GSM 1800 or LTE FDD-3 band
o
12.7 dBi in the 1900 MHz band, i.e. LTE TDD-39 band
o
12.3 dBi in the 2100 MHz band, i.e. UMTS FDD-1 or LTE FDD-1 band
o
13.0 dBi in the 2300 MHz band, i.e. LTE TDD-40 band
o
13.0 dBi in the 2500 MHz band, i.e. LTE TDD-41 band
The conformity assessment procedure for the modules, referred to in Article 17 and detailed in Annex II of
Directive 2014/53/EU, has been followed.
Thus, the following marking is included in the product:
