Turner OCTO Скачать руководство пользователя страница 5

Страница: 5 / 64

Turner OCTO

Assembly Guide

T: +44 (0) 141 309 5555 F: +44 (0) 141 309 5436 www.turner-octo.com

Section 1 Page 5

TA3/01/50/01_Iss1Rev3

Rev.No.Jan17/Rev3

SECTION 1.2 Pre-use Inspection & Selection

1.2

PRE-USE INSPECTION & SElECTION

To ensure that a scaffold is assembled in a manner that prevents its component parts from

being accidentally displaced at any time, it is important that the following checks are carried

out:

•

Ensure that all necessary components and safety equipment are available and

operational.

•

Each component should be visually inspected prior to use and should be free from

defects.

•

Steel components should be straight with no sign of corrosion, cracks or splits that

would impair strength or safety.

•

Deck locks should be in good working order; hooks should be free of cracks and

corrosion, and bolts should be tight and locking nuts fitted.

•

Stiles or Ply inserts should not be punctured or worn to a degree that would impair

strength or safety.

Damaged or incorrect components must not be used.

Pre-use inspection should ONLY be carried out by a competent person.

Содержание OCTO

































































Результаты поиска

Содержание OCTO

Отзывы:

Turner OCTO, Инструкция по сборке, Страница: 5 / 64

Результаты поиска

Содержание OCTO

Отзывы: