ConnectMe Tunstall Vi+ Installation and Programming Manual
21
Unit ID numbers
The home unit sends a unit ID number to the monitoring centre when an alarm is
sent. The number identifies which home unit is sending the alarm. Unit ID number 1
must be programmed into the home unit (default 995) in order for an alarm to be
sent. The unit ID number may be the same for all monitoring centres and personal
recipients. If required the home unit can be configured to send a different unit ID to
each telephone number it is programmed to call.
Adding/Changing a unit ID
Unit IDs can be programmed into the home unit by pressing:
Unit ID (max 12 digits)
Sets Unit ID 1
To set Unit ID 2 replace 02 with 12
To set Unit ID 7 replace 02 with 17
To set Unit ID 3 replace 02 with 13
To set Unit ID 8 replace 02 with 18
To set Unit ID 4 replace 02 with 14
To set Unit ID 9 replace 02 with 19
To set Unit ID 5 replace 02 with 15
To set Unit ID 10 replace 02 with 20
To set Unit ID 6 replace 02 with 16
Deleting a unit ID
To delete a unit ID press:
Deletes Unit ID 1. Replace 02 with the numbers identified above to delete the appropriate Unit
ID number.
NOTE
: If no unit ID is linked to a telephone number, the first valid code will be used. The actual number
of digits sent to the alarm receiver depends upon the type of monitoring centre being used. Please
contact your monitoring centre for more information.
