ConnectMe Tunstall Vi+ Installation and Programming Manual
40
Personal recipient messages
Dealing with personal recipient calls from a touch-tone telephone
Alarm calls can be sent to personal recipients, when a personal recipient receives an
alarm call they will hear a spoken message ‘This is an alarm call from’ followed by
either the Unit ID or a recorded message e.g. Mrs Smith (Tunstall Vi+ only
– see next
section). The recipient can then handle the call using their keypad as follows:
Function
Button
Notes
Accept Call
5
Clear Call
* then #
Call must be accepted first
Volume up
1
Alters home unit volume
Volume down
2
Talk
7
Only required if mode is changed from Hands-
free Voice Switched (HVS) to tone switched by
pressing 7 followed by *.
Listen
*
Recordable personal recipient messages (Tunstall Vi+ only)
A personal recipient message can be recorded on the Tunstall Vi+ home unit to
replace the ID message that a personal recipient would normally hear when they
receive an alarm call.
To record the message:
Firstly enter programming mode on the Tunstall by holding the cancel button down
until it beeps, then press the following on the connected telephone keypad.
Then record the message,
press * to end the recording. If using the keypad
press cancel to stop recording
Note: if a message is already recorded, this key sequence will replay the message. If
this is the case the message must be deleted before a new message can be
recorded.
To delete the message, press:
Speech configuration
This feature configures how the speech prompts programmed into the home unit are
used during alarms, local warnings and programming. Please see the help files within
PC Connect for more details. Tunstall Vi+ offers complete speech configuration.
