Tunstall ConnectMe Vi+, Инструкция по установке и программированию

Страница: 24 / 63

ConnectMe Tunstall Vi+ Installation and Programming Manual 24
Quick Codes
The Tunstall Vi+ home unit has a number of quick codes that can be entered into the
series telephone when the home unit is in programming mode or remotely via PNC4
(v2.5.1) and PNC5/6.
Quick
Code
Purpose Comments
2040 Reset to default but retain radio triggers Time and date remain unchanged
2050 Reset to factory defaults Time and date remain unchanged
2060 Delete ALL radio triggers Restores to default
3000 Delete the next radio trigger transmitted Must activate trigger
3011 Activate external relay for 2 seconds All alarms (Call Raised)
3012
Activate external relay for all alarms when call
selected and de-activate when calls cleared
Call Selected
Call Cleared
3013 Activate external relay on radio smoke alarm
and de-activate when cleared Smoke Alarm
Call Cleared
3014 Disable external relay for all events
3020 Announce date and time
31xx
Enables periodic calls (30 day) with offset of xx
hours
3100 Disables periodic calls
3300
Demonstrates the pendant test reminder
function
4zxx Set the last registered trigger for zone and
location Must be done before exiting
program mode where z = 0 for zone
1 and 1 for zone 2, xx = TT21
location code, see table 1
45xx Set hardwire input to trigger type number Where xx trigger type code, see
table 2
46xy Set hardwired input sensor x = 0 for disable, 1 = n/o, 2 = n/c
y = 1 for zone 1 and 2 = zone 2
47xx
Set hardwired input location Where xx is TT21 location code,
see table 1
48xy Set destination Where x is telephone number 1 to
10 ( 0 = 10 ) y = 0 for CC, 1 for PR
and 2 for POTS
51xx Enable inactivity monitoring for a period of 12 or
24 hrs Where xx is 12 or 24
6001
Enable intruder Default entry/exit time 30 secs
6002 Disable intruder
6003 Set last assigned trigger as a Zone 1 armer Home unit must be in assign mode
6004 Set last assigned trigger to be a Bogus Caller Home unit must be in assign mode
6005 Set last assigned trigger to be a Zone 1 and
Zone 2 armer Home unit must be in assign mode
6006 Set last assigned trigger to be Zone 1 and Zone
2 arm/disarmer Home unit must be in assign mode
6008 Set last assigned trigger to start entry/exit tones
on activation Home unit must be in assign mode
6009 Set last assigned trigger to not start entry/exit
tones on activation Home unit must be in assign mode
61xx Enable intruder and set entry/exit tones Where xx is in seconds
6413 Enable intruder disarm method of AWAY and
personal trigger