Trumpf 1717020, Инструкция по эксплуатации

Страница: 34 / 90

Overview of operating table column
34
4990113_030_01 — 2069106 — 2017–11–02
3.5 Audible signals (factory setting)
Various audible signals sound in conjunction with specific
operational procedures or statuses of the operating table.
In addition to the acoustic signals, a corresponding indicator is
shown in the display when using the TruSystem 7500 remote
control device. While the operating table is switched on, no display
appears on the remote control.
Action Description of audible signal
Switch on the operating table Ascending tone sequence
Switch off the operating table Descending tone sequence
End position or level position of
selected adjustment range
reached
Single tone
Confirmation of an operational
procedure, e.g.:
– Level position of the operating
table reached
Double tone
– Transfer finished Double tone
Charging of the operating table
column is required
2 pulsing tone sequences
intermittently repeating (at an
interval of several minutes -
battery tone)
Error Shrill triple tone (error tone)
Warning, e.g.:
– Leg sections moving toward
one another during single
hinge adjustment
– Emergency transfer
– Emergency mode
Repeating shrill single tone
(warning tone)
During movement, the warning
tone sounds repeatedly at
intervals of a few seconds.