Trinnov Audio Altitude16, Руководство пользователя

Страница: 87 / 156

User manual
87
6.8 _CALIBRATION
At this step of the Wizard your system is ready to be calibrated.
Figure 82: Calibration step in the Wizard
6.8.1 _SINGLE-POINT CALIBRATION
If you are only interested by the calibration of one point of measurement (normally the
reference hearing point of your system) you can already click on Calibrate. The system will
automatically start by sending MLS bursts to your speakers.
NOTES: The calibration tool plays three MLS bursts for every speakers and subwoofers. If the calibration goes
wrong, please see the section 6.10.3 of this manual. The calibration will add the speaker position related to the
reference point during the calibration.
The calibration status has 3 possible values:
• Complete : If no problem occurred during the measurement. After calibration, the system is calibrated but not ready to be
used, which means no sound can go through the processor until the optimization filters are computed.
• Partial : If the calibration was stopped in the middle of the measurement process.
• None : When no measurement has been performed.
Once the status of the calibration indicates complete, you can click on Next. Since there is only one measurement point, you
can skip the weighting step.