Trinnov Audio Altitude16, Руководство пользователя

Страница: 57 / 156

User manual
57
IMPORTANT NOTE: Some configurations are not allowed by the decoders. In such cases, a red warning will be
displayed on the side panel and the relevent speakers will be highlighted in red. The side panel gives you some
information on the prerequisite conditions for some speakers.
NOTE: If you choose to add a speaker, the Altitude
16
will automatically suggest to add the mandatory associated
speaker(s). This will help you to keep the integrity of the recommendations of each decoder.
To add a subwoofer:
1. Click on the Add Speaker button;
2. Click on the Add Sub button below the Speaker position drop-down list.
!
NOTE: The Add Sub button adds subwoofers regardless of formats. The subwoofer positions displayed are not
significant and will not affect the sound.
6.3.6 _ADDING DOLBY ENABLED UPFIRING SPEAKERS
If your configuration has some Dolby-Enabled up-firing speakers, they will appear on the
3D view as ceiling speakers as they are used to reproduce elevation channels. In the drop-
down list, those speakers end with an “e” which stands for “enabled”.
Here are the available Dolby-Enabled speakers:
• Le: Left up-firing Dolby-Enabled speaker;
• Re: Right up-firing Dolby-Enabled speaker;
• Lse: Left Surround up-firing Dolby-Enabled speaker;
• Rse: Right Surround up-firing Dolby-Enabled speaker;
• Lrse: Left Rear Surround up-firing Dolby-Enabled speaker;
• Rrse: Right Rear Surround up-firing Dolby-Enabled speaker;
To add a Dolby-enable speaker from the drop-down list, please, use the normal procedure explained above in the
Adding Regular Speakers sub-chapters.
To add a Dolby-enabled speaker from the 3D view, click on one of the Dolby Top Speakers. As explained above, the
Dolby enabled speakers are using the signal from Top speakers to recreate the immersion effect. The speakers
concerned are
• Left and Right Top Front (Ltf/Rtf);
• Left and Right Top Middle (Ltm/Rtm);
• Left and Right Top Rear (Ltr/Rtr).
Use the procedure explained in the previous chapter to add a speaker from the 3D view. Select the speakers listed
above. When clicking on Add, a dialog box will appear asking you to choose between the regular in-ceiling speaker
or the associate Dolby-enabled up-firing speaker. Select the desired one.