Trinnov Audio Altitude16, Руководство пользователя

Страница: 141 / 156

User manual
141
10.4.4 _CALIBRATE THE ACTIVE CROSSOVERS
Low-driver calibration High-driver calibration
2. 1.
ACTIVE
XOVER
ACTIVE
XOVER
Figure 135: the steps of the calibration process
Once the master output level is set (see previous step), the Altitude
16
crossover calibration tool will automatically setup the
level, delay and polarity of each driver.
Figure 136: Performing the calibration of the active crossovers
Before calibration, please note:
• The calibration procedure has to be done individually for each speaker;
• An MLS signal is sent to each driver of the selected speaker when the Calibrate button is pressed;
• At the end of the calibration process, a warning message states that a new calibration of the entire system is required.